Крякнутый Стим
Нам нужна контра 1.6 и патч на ней не ниже версии 19
1. Берем патч осюда >>>
http://awg-clan.da.ru/modules.php?name=Dow...op=getit&lid=10
2. Распаковываем его в контру.
3. Берем стим (если у вас его нет то скачатæ можно здесь:
http://awg-clan.da.ru/modules.php?name=Dow..._op=getit&lid=9 )
4. Регимся в стиме и идем в папку с КС там ищем файл который называется SteamApp.CFG .
5. Открываем его в блокноте и исправляем на свои данные. В Этом файле находится что-то вроде этого:
############################################################################
##
# SteamApp.cfg
#
# Steam Client App configuration-override file
#
# This file is read by the Steam code in the Client
# Application, and controls configurable parameters that
# affect only that App.
#
# To be effective it must be placed in the App directory
# (for example, c:\Steam\SteamApps\
[email protected]\Half-Life\).
#
############################################################################
##
#
# Debug-launch settings
#
# Use these settings when you are running your application directly
# from your debugger (ie, not launching the App from the Steam UI)
# In such cases, you need to tell Steam which application
# you are running and the version you want to use. Each application has
# an ID number and each version of your application has a version ID number.
# You also need to indicate the username you are running Steam under.
#
# SteamInstallPath should point to the directory where the corresponding Steam.exe
# resides
#
# To do a debug launch:
#
# - do at least one launch from the UI first to ensure the Minimum Footprint files
# are present
# - leave the Steam UI running
# - copy this file into the App directory
# - fill out the following config parameters
# - copy Steam.dll into the App directory
# - run the app directly or through the debugger, with "-steam" on the command line
#
# You may leave it setup and still do normal launches through the
# Steam UI. However, if you comment out the SteamInstallPath parameter,
# you must also REMOVE Steam.dll from the App directory, or else the
# launch will fail with "The local Steam service is not running".
#
SteamAppId=92
#SteamAppVersionId=0
SteamInstallPath="Куда установлена КС до файла hl.exe по умолчанию он здесь C:\Programfiler\Valve"
# [as is clearified later on, this should be your email address
![:] :] :]](/forum/images/smilies/pleased.gif)
#SteamAppUser=Мыло на которое вы зарегили
SteamAppUser=Име которое вы зарегили
SteamUserPassphrase="здесь пароль"
6. Заменяем на свои данные и сохраняем.
7. Потом создаем новый ярлык от hl.exe и добавляем туда >>> -steam -game cstrike и выйдет чото типа такого >>> C:\Programfiler\Valve\hl.exe -steam -game cstrike
8. Идем в КС и на любой сервак.